Towel Warmer Elements

Thermostatic Element

IP44 Rated Thermostatic (Electric Element)

Available in 150w, 300w, 600w & 900w

Suitable for installation in zone 2 of the bathroom

  • •  Controls room temperature
  • •  2 hour boost function
  • •  Frost protect function
  • •  Electronically controlled
Electriq

IP66 Rated Electriq (Electric Element)

Available in 200w, 400w & 600w

Suitable for installation into Zones 1 and 2 of the bathroom.

Each standard Electronique element is able to achieve a constant surface temperature without expensive external control equipment.

The surface temperature will remain constant to the touch, whether the rail is fully covered with towels, or bare, in a cold or hot ambient, day or night.

In the fully loaded towel warming mode, it will act to reduce power and save running cost.

In space heating mode the control system will increase the power to deliver the background heat needed to the maximum of its rated capacity.

The system is safe to touch and safety features are incorporated into the design to ensure the system will fail-safe in the unlikely event of control component malfunction.

Standard Element

IP55 Rated Standard (Electric Element)

Available in 75w, 100w, 125w, 150w, 200w, 300w, 400w, 600w

Suitable for installation into Zones 1 and 2 of the bathroom for non high pressure water jet applications.

Manufactured in accordance with:
EN60335-1 / BS EN ISO 9001

Each standard element contains an internal preset over temperature switch and fail safe fuse. There is no thermostatic control with this element although a suitably rated rheostat (CD-VR) will give thermal control when fitted into the electrical supply circuit.